268811 The flange gasket is a spare part for the Tatramat water heater, increasing reliability.

🔩Tatramat Water Heater Gasket – 268811

The water heater flange gasket is a key spare part for the safe and trouble-free operation of your Tatramat boiler. This original Tatramat 268811 gasket with 8 mounting holes and a diameter of 110 mm ensures that all joints between the flange and the water heater body remain perfectly sealed. Thanks to the high-quality material, it is able to withstand long-term exposure to hot water, high temperatures and pressure, which significantly reduces the risk of leaks, reduced energy efficiency and subsequent damage to the device. ⭐ If you notice water leakage around the flange or loss of pressure, the old gasket must be replaced.

✔ Number of holes: 8
✔ Outer diameter: 110 mm
✔ Part code: 268811
✔ Brand: Tatramat (AfterMarket)
✔ EAN: 8757521787041
With this seal, you will extend the life of your Tatramat water heater and avoid unnecessary repairs. When installing, we always recommend using a high-quality original part or an aftermarket solution that exactly matches the manufacturer's specifications. Modern sealing materials ensure reliable insulation against water and steam and withstand commonly used water hardness. 🚿 Replacement is suitable not only in the event of leaks, but also for preventive maintenance every few years.

🔧 Technical information and installation
Part code: 268811
Number of holes: 8
Outer diameter: 110 mm
Product origin: AfterMarket
Goods condition: New, not installed
Warranty for original parts: 24 months
Return policy: within 14 days of receipt
Before installation, always turn off the water heater from the electrical network and close the water supply. 🛠️ Remove the flange and carefully clean the mounting surfaces. Place the new gasket in place, check the exact fit in all eight holes and make sure to tighten the screws evenly without overloading the material. After putting the device back into operation, always check the tightness of the joints and make sure that there are no leaks.

💡 Why replace the flange gasket on the water heater?
Old or damaged seals can cause water leaks, reduce heating efficiency and, in extreme cases, lead to serious damage to the heater itself. Regular maintenance and timely replacement of sealing components not only saves on repairs, but also extends the life of the entire appliance. The Tatramat 268811 seal is suitable as a spare part for many models of this brand and its use is recommended in accordance with the manufacturer's technical documentation. 🏆

Compatible appliances
The most common compatible water heaters include:

Tatramat EO 10 P
Tatramat EO 15 P
Tatramat EO 30 P
Tatramat EO 50 P
Tatramat EOV 80
Tatramat EO 120
Tatramat EO 80 P
Tatramat EO 100
Tatramat EOV 120
Tatramat EO 60 P
💡 Tip: Always check the compatibility of your Tatramat heater model (or related brands, e.g. Stiebel Eltron or Dražice) by name and part code 268811 in the user manual or service documents of the device. This part is only intended for flanges with 8 holes and a diameter of 110 mm.