277586 8-hole flange is a spare part for the EWH water heater and allows for easy installation

🔩Flange 8 holes for EWH Comfort water heater from 2007 (277586)

The flange for the EWH Comfort boiler from 2007 is an original spare part designed for EWH water heaters, especially the AEG EWH Comfort 120 N models. 🔧 With a diameter of 18 cm (180 mm), it guarantees precise installation on most boilers of this series. This part is characterized by 8 mounting screws, which ensures optimal tightness and stability even during long-term operation.

The flange contains holes for two heating elements and a sensor well for the thermostat, which allows easy installation, service and replacement of worn parts. 🛠️ It is made of high-quality steel with a surface treatment for increased corrosion resistance, ensuring reliable operation of the boiler at home, at the cottage or in the business. Compatible only with recommended manufacturer models - always check the conformity according to the type of heater before ordering!

✔ Number of screws: 8
✔ Hole(s) for heating elements: 2
✔ Place for thermostat: 1
✔ Circle diameter: 18 cm / 180 mm
✔ EAN: 875752172008
✔ Part code: 277586
✔ Origin of part: Original
Assembly recommendations 🛠️
We recommend that you entrust the installation of the flange to a professional technician, but you can always use the following procedure: Disconnect the boiler from the power supply, drain the water and remove the old flange. Install the new flange carefully to avoid damaging the seal. Tighten all 8 screws evenly for ideal pressure. After installation, follow the instructions of the heater manufacturer. 📑

Regular inspections and replacement of worn parts will ensure a long service life of the boiler and operational safety. (Before replacing, we recommend taking a photo of the original connection for easier orientation during assembly and disassembly.)

Technical parameters
Product: Flange for EWH Comfort boiler from 2007
Code: 277586
EAN: 875752172008
Origin: Original, manufacturer according to the heater label
Compatibility: AEG EWH Comfort 120 N, other EWH Comfort models manufactured since 2007
Hole(s): for two heating elements and one thermostat
Compatible appliances
The flange is fully compatible with the following boiler and water heater models:

AEG EWH Comfort 120 N
AEG EWH Comfort 100
AEG EWH Comfort 80 L
Aquastic AQ 120 EWH Comfort
Electrolux EWH Comfort 100
AEG Favorit 120 N
Fagor EWH Comfort 100
AEG EWH Comfort 80
Aquastic AQ 80 EWH Comfort
Gorenje TGR80N Comfort
💡 Tip: When replacing the flange, always also change the gasket and carefully check the condition of the heating elements. Regular maintenance of the water heater will extend its service life and increase household safety.
Safety principles ⚠️
Always work with the appliance disconnected from the mains and the boiler cooled down.
Use only original parts specifically designed for your heater model.
Check the gasket before installation.
If in doubt, contact an authorized service.
Store the flange in a dry place and protected from moisture.
Packaging: 1× flange for the boiler. Condition: new, original part.